QUESTION BANKs CS2253
CS 2253 COMPUTER ORGANIZATION AND ARCHITECTURE
Anna University B.E/B.Tech 4th and 6th
Semester Model
Subject Name: Computer Architecture Year/Sem:II/IV
UNIT-I
BASIC STRUCTURE OF COMPUTERS
PART-A(2 MARKS)
1. What is computer?
2. Explain (i)ENIAC (II)UNIVAC .
3. Define Multiprocessing.
4. Give the name of the Von Neumann Computer.
5. Define Time sharing.
6. What is meant by VLSI Technology?
7. Define parallel processing.
8. Define Pipeline processing.
9. What is an operating system?
10. Define system throughput.
11. Mention some applications of parallel processing.
12. What is Mainframe Computer?
13. What is Workstation?
14. List the steps involved in the instruction
execution.
15. Define Microcomputer.
16. What is Personal Computer?
17. Write the features of the third generation of computers.
18. What is Mini Computer?
19. Classify Parallel Computers.
20. What are the main components of a uniprocessor?
PART-B (16 MARKS)
1. Explain the Differences between CISC & RISC.
2. Explain the various Instruction types?
3. Write in detail about various addressing modes.
4. Explain the architecture of a basic Computer.
5. Explain the various generations of Computer.
UNIT-II
ARITHMETIC UNIT
PART-A(2 MARKS)
1. What are the types of ALU?
2. Give any 2‘s Complement Multiplier algorithm.
3. Give advanced features of ALU.
4. What is a Co-Processor?
5. Define Micro operation.
6. What are the types of micro operations?
7. Draw the circuits which performs both addition and
subtraction.
8. Perform arithmetic operation with binary numbers
with negative numbers in signed 2’s
complementary form (-35) + (-40).
9. Draw the block diagram of n-bit two’s complement
adder – sub tractor.
10. Design 4-bit combinational circuit using 4 full
adders.
11. Write IEEE standard for floating point format.
12. Give a schematic of 2-bit array multiplier.
13. What is the difference between the restoring and
non restoring method of division?
14. What is meant by bit slice processor?
15. State the principle of carry look ahead adder.
16. Give the principle of operation of Booth’s
multiplication algorithm.
PART-B (16 MARKS)
1. Explain the Booth’s algorithm for multiplication of
signed two’s complement numbers.
2. Explain the floating point addition and subtraction
.
3. State the Non – restoring division technique.
4. Explain with a diagram the design of a fast
multiplier using carry save adder circuit.
5. Give the block diagram for a floating point adder
and subtractor unit and discuss its operation.
6. Draw and explain the flowchart of floating point
addition process.
UNIT-III
BASIC PROCESSING UNIT
PART-A(2 MARKS)
1. What are the types of control organizations we
have?
2. What are the differences between the hardwired
control organization and micro programmed
Control organization.
3. What is a control word?
4. What is micro programmed control unit?
5. What is micro instruction?
6. What is micro program?
7. What are the differences between the main memory
and control memory?
8. What is micro program sequencer?
9. What is meant by mapping process?
10. Give the micro instruction format.
11. What is hard wired logic?
12. What is micro programming?
13. What are the advantages and disadvantages of micro
programming?
14. What is pipelined computer?
15. List the various pipelined processor.
16. Classify the pipeline computer.
17. Give the basic structure of the pipeline
processor.
18. Write down the expressions for speedup factor in a
pipelined architecture.
19. Name two types of memory interleaving.
20. Give the instruction format of Vector instruction.
21. What is space diagram?
PART-B (16 MARKS)
1. Explain Hardware control unit.
2. Write in detail about Micro program control unit.
3. Describe in detail about pipeline processing.
4. Explain in detail about hazards.
5. Explain the different wired controllers.
6. Write short notes on superscalar processors.
UNIT-IV
MEMORY SYSTEM
PART-A(2 MARKS)
1. What is Memory system?
2. Give classification of memory.
3. Define cache.
4. What is Read Access Time?
5. Define Random Access Memory.
6. What are PROMS?
7. Define Memory refreshing.
8. What is SRAM and DRAM?
9. What is Volatile memory?
10. Define data transfer or bandwidth.
11. What is Flash memory?
12. What is multilevel memories?
13. Give the basic structure of cache and what is its
use?
14. What is associate memory?
15. Define Seek time and latency time.
16. What is DVD?
17. Define Magneto Optical Disk.
18. Define Virtual Memory.
19. Distinguish between Static and Dynamic.
20. Define the term LRU and LFU.
PART-B (16 MARKS)
1. Illustrate the characteristics of some common
memory technologies.
2. Describe in detail about associative memory.
3. What is Memory Interleaving? Explain the addressing
of multiple module memory system.
4. Discuss the different mapping techniques used in
cache memories and their relative merits
and demerits.
5. Comparing paging and segmentation mechanisms for
implementing the virtual memory.
6. What do you mean by virtual memory? Discuss how
paging helps in implementing
virtual memory.
7. Discuss any six ways of improving the cache performance.
UNIT-V
I/O ORGANIZATION
PART-A(2 MARKS)
1. Define intra segment and inter segment
communication.
2. Mention the group of lines in the system bus.
3. What is bus master and slave master?
4. Differentiate synchronous and asynchronous bus.
5. What is strobe signal?
6. What is bus arbitration?
7. Mention types of bus arbitration.
8. What is IO control method?
9. What is DMA?
10. Why does the DMA priority over CPU when both
request memory transfer?
11. List out the types of interrupts.
12. What is dumb terminal?
13. What is the need for DMA transfer?
14. List down the functions performed by an
Input/Output.
PART-B (16 MARKS)
1. Explain with the block diagram the DMA transfer in
a computer system.
2. Describe in detail about IOP organization.
3. Describe the data transfer method using DMA.
4. Write short notes on the following
(a) Magnetic disk drive (8)
(b) Optical drives (8)
5. Discuss the design of a typical input or output
interface.
6. What are interrupts? How
are they handled?
credit goes to VIKI
thanks viki
regards
admin
.jpg)
